show lldp interface

Displays the LLDP status on the specified interface.

Syntax

show lldp interface [ ethernet slot/port ]

Parameters

ethernet: Use this parameter to specify an Ethernet interface, followed by the slot or port number. For devices that do not support line cards, specify 0 for the slot.
slot: Specifies a valid slot number. 0 is the only valid entry.
port: Specifies a valid port number.

Modes

Privileged EXEC mode

Usage Guidelines

If the ethernet slot/port parameter is not specified, this command displays the LLDP status information received on all the interfaces.

Examples

To display all the LLDP ethernet interface information, enter the following:

device# show lldp interface ethernet ?
Description: The list of Ethernet interfaces.
Possible completions:
  0/1
  0/2
  0/3
  0/4
  0/5
  0/6
  0/8
  0/9
  0/10
  0/11
  0/12
  0/13
  0/14
  0/15
  0/16
  0/17
  0/18
  0/19
  0/20
  0/21
  0/22
  0/23

To display the LLDP interface information for a specified ethernet interface, enter the following:

device# show lldp interface ethernet 1/18
LLDP information for Eth 1/18
  State:                   Enabled
  Mode:                    Receive/Transmit
  Advertise Transmitted:   30 seconds
  Hold time for advertise: 120 seconds
  Tx Delay Timer:          1 seconds
  Transmit TLVs:           Chassis ID               Port ID
                           TTL                      Port Description
                           System Name