In an NPB route-map, drops traffic if this statement becomes the active setting.
Route-map configuration mode
The no form of this command deletes the matching filter from the ACL.
The following example contains a set uda interface null0 statement.
device# configure terminal device(config)# uda access-list uda_01 device(conf-udaacl-ext)# permit 0x00001111 0x0000ffff 0x00002222 0x0000ffff 0x00003333 0x0000ffff 0x00004444 0x0000ffff count device(conf-udaacl-ext)# exit device(config)# route-map rm_UDA_01 permit 1 device(config-route-map-rm_UDA_01/permit/1)# match uda uda_01 device(config-route-map-rm_UDA_01/permit/1)# set interface ethernet 1/5 device(config-route-map-rm_UDA_01/permit/1)# set interface ethernet 1/6 device(config-route-map-rm_UDA_01/permit/1)# set uda interface null0