firmware peripheral-update fpga

Updates the Field Programmable Gate Array (FPGA) flash memory with the latest image from the installation package.

Syntax

firmware peripheral-update fpga

Modes

Privileged EXEC mode

Usage Guidelines

This command is supported only on SLX 9540 and SLX 9640 devices.

The following message appears when this command is executed:

WARNING: Hardware image will be upgraded and followed with a board-level power cycling. Do you want to continue?[y/n]:

After the FPGA is updated, the entire board is power-cycled.

Examples

The following example upgrades the firmware on an SLX 9540.

device# firmware peripheral-update fpga
WARNING: Hardware image will be upgraded and followed with a board-level power cycling.
Do you want to continue?[y/n]: y

erasing  \ …..
erasing .. ... done
programming .......................... 25% .......
programming .......................... 25% .......................... 50% .......................... 75% .......................... 100%
sysfpga image is upgraded successfully.
device#