peer-interface

Configures the Ethernet interface or port-channel to reach the MCT cluster peer.

Syntax

peer-interface Ethernet slot/port | port-channel number
no peer-interface

Parameters

Ethernet slot/port
Specifies the Ethernet interface for the cluster peer.
port-channel number
Specifies the port-channel for the cluster peer.

Modes

Cluster configuration mode.

Usage Guidelines

The no form of the command deletes the peer interface configuration.

You must configure the peer interface before deploying the cluster configuration.

You cannot change the peer interface when the cluster is deployed.

Examples

The following example shows the configuring of the cluster peer interface. 

device(config)# cluster MCT1 
device(config-cluster-MCT1)# peer-interface port-channel 20
9036689-01 Rev AA