interface (telemetry)

Specifies monitored interfaces for the interface telemetry profile-type.

Syntax

interface interface

no interface interface

Command Default

No interfaces are defined and the profile is inactive.

Parameters

interfaces

Specifies the profile interfaces, up to 1000 characters. The format options are:

slot/port, for example, 0/1
slot/port1-port2, for example, 0/1-5
slot/port1:breakout1-breakout2, for example, 0/4:3-4

Modes

Telemetry profile configuration mode

Usage Guidelines

If you do not specify at least one interface, the profile has no effect.

For other telemetry profiles that require you to configure interfaces, the syntax of this command is interface-range.

To remove interfaces from the interface profile, use the no form of this command.

Examples

The following example configures the interfaces to be used in the interface streaming profile.

device# configure terminal
device(config)# telemetry profile interface default_interface_statistics
device(config-interface-default_interface_statistics)# interface 1/2-3,2/1-3,3/6-9