ipv6 pim snooping enable

Enable IPv6 PIM snooping on a VLAN or bridge domain.

Syntax

no ipv6 pim snooping enable

By default, IPv6 PIM snooping is enabled when IPv6 PIM is enabled on a Layer 3 VLAN interface.

By default, IPv6 PIM snooping is disabled on a Layer 2 interface.

VLAN or bridge-domain configuration mode

The no ipv6 pim snooping enable form of the command disable disables snooping.

This example enables IPv6 PIM snooping on a VLAN.

device# configure terminal
device(config)# vlan 30
device(config-vlan-30)# ipv6 pim snooping enable