show ipv6 ospf database

Displays lists of information about different OSPFv3 link-state advertisements (LSAs).

Syntax

show ipv6 ospf database [ advrtr A.B.C.D | extensive | grace | link-id decimal | prefix ipv6-addr ] [ vrf vrfname ]

show ipv6 ospf database scope { area { A.B.C.D | decimal } | as | link } [ vrf vrfname ]

show ipv6 ospf database summary [ all-vrfs | vrf vrfname ]

advrtr A.B.C.D: Displays LSAs by Advertising Router Id in dotted decimal format.
extensive: Displays detailed lists of LSA information.
grace: Displays grace LSA information.
link-id decimal: Link-state ID that differentiates LSAs. Valid values range from 1 through 4294967295.
prefix: Display LSAs that contain a prefix.
ipv6-addr: Specifies an IPv6 address.
vrf vrf name: Specifies a non-default VRF instance.
as-external: Displays information about external LSAs.
inter-prefix: Displays information about inter area prefix LSAs.
inter-router: Displays information about inter area router LSAs.
intra-prefix: Displays information about intra area prefix LSAs.
link decimal: Displays information about the link LSAs.
network: Displays information about network LSAs.
router: Displays information about router LSAs.
type-7: Displays information about the not so stubby area (NSSA) external LSAs.
scope: Displays LSA information by LSA scope.
area: Displays LSAs by scope within a specified area.
as: Displays autonomous system (AS) LSAs by scope.
link: Displays link LSAs by scope.
summary: Displays LSA summary information.
all-vrfs: Specifies all VRFs.

Privileged EXEC mode

The following is sample output from the show ipv6 ospf database as-external command using the link-id keyword:

device# show ipv6 ospf database as-external link-id 5

The following is sample output from the show ipv6 ospf database inter-prefix command using the link-id keyword:

device# show ipv6 ospf database inter-prefix link-id 5

The following is sample output from the show ipv6 ospf database network command:

device# show ipv6 ospf database network

The following is sample output from the show ipv6 ospf database router command:

device# show ipv6 ospf database router

The following is sample output from the show ipv6 ospf database type-7 command:

device# show ipv6 ospf database type-7

The following is sample output from the show ipv6 ospf database scope command using the area keyword:

device# show ipv6 ospf database scope area 0