lsp-interval

Sets the rate of transmission, in milliseconds, of the Link State PDUs (LSPs).

Syntax

lsp-interval interval
no lsp-interval interval

Command Default

The default interval is 33 milliseconds.

Parameters

secs

Specifies the interval in milliseconds. Valid values range from 1 through 4294967295 milliseconds. The default is 33 milliseconds.

Modes

IS-IS router configuration mode

Usage Guidelines

IS-IS is supported only on devices based on the DNX chipset family. For a list of such devices, see "Supported Hardware".

The no form of the command removes the configured interval.

Examples

The following example changes the LSP interval to 45 milliseconds.

device# configure terminal
device(config)# router isis
device(config-isis-router)# lsp-interval 45