show ipv6 mld snooping

Displays snooping information for the specified VLAN or bridge domain.

Syntax

show ipv6 mld snooping [vlan vlan id | bridge-domain bd id]

Parameters

vlan

Specifies the VLAN for which to see snooping information.

vlan id: Specifies the ID of the VLAN.

bridge-domain

Specifies the bridge domain for which to see snooping information.

bd id: Specifies the ID of the bridge domain.

Modes

Privileged EXEC mode

Examples

The following example shows typical output for a bridge domain.

device# show ipv6 mld snooping bridge-domain 10
Bridge-domain ID: 10
 Multicast Router ports: Eth 0/44.200
 Querier - disabled
 MLD Operation mode: MLDv2
 Is Fast-Leave Enabled : Disabled Max Response time = 10
 Last Member Query Interval = 10 Query interval = 125
 Number of Multicast Groups: 0 
 Group: ff28::1
 Member Ports: Eth 0/44.200