sysmon sfm-walk

Enables SFM walk.

Syntax

sysmon sfm-walk [ auto | disable-redundancy-check | poll-interval | threshold]

Parameters

auto: Enable auto SFM walk.

disable-redundancy-check: Disables SFM Walk redundancy check.

poll-interval: Sets SFM Walk poll-interval.

threshold: Sets SFM Walk reassembly error threshold.

Modes

Global configuration mode

Usage Guidelines

By default, SFM walk and redundancy check are disabled.

Examples

device(config)# sysmon sfm-walk ?
Possible completions:
  auto                       Enable Auto SFM Walk (Default: Disabled)
  disable-redundancy-check   Disable SFM Walk redundancy check (Default:
                             Enabled)
  poll-interval              Set SFM Walk poll-interval
  threshold                  Set SFM Walk reassembly error threshold
device(config)# sysmon sfm-walk auto?
Possible completions:
  auto   Enable Auto SFM Walk (Default: Disabled)
device(config)# sysmon sfm-walk auto ?
Possible completions:
  <cr>
device(config)# sysmon sfm-walk disable-redundancy-check?
Possible completions:
  disable-redundancy-check   Disable SFM Walk redundancy check (Default:
                             Enabled)
device(config)# sysmon sfm-walk disable-redundancy-check ?
Possible completions:
  <cr>
device(config)# sysmon sfm-walk poll-interval?
Possible completions:
  poll-interval   Set SFM Walk poll-interval
device(config)# sysmon sfm-walk poll-interval ?
Possible completions:
  <1-600>   Default: 30 Sec
SLX(config)# sysmon sfm-walk poll-interval 500
The Client sysmgr is not Known or Connected