Creates a bypass LSP by using the bypass-lsp command. Thereafter, in the bypass LSP context, you must specify at least one interface as an excluded or protected interface.
MPLS router configuration mode
The name variable must be unique among all regular LSPs and bypass LSPs.
The no form of the command deletes the bypass LSP from the system.
MPLS is supported only on devices based on the DNX chipset family. For a list of such devices, see "Supported Hardware".
The following example selects the xm4-by LSP as a bypass LSP.
device>configure device(config)# router mpls device(config-router-mpls)# bypass-lsp xm4-by device(config-router-mpls-bypasslsp-xm4-by)#