link-oam remote-loop-back
Starts and stops the remote loopback on peer that is connected to a local ethernet interface.
Syntax
link-oam remote-loop-back
ethernet
slot-number
/
port-number
[
start
|
stop]
Parameters
- slot-number
- Specifies the slot number. For devices
without linecards, specify 0.
- port-number
- Specifies the port number.
- start
- Start the remote loopback on peer that is connected to the interface.
- stop
- Stops the remote loopback on peer that is connected to the interface.
Modes
Privileged EXEC mode
Examples
device# link-oam remote-loop-back ethernet 0/1 start
