show isis config

Displays the global IS-IS configuration commands that are in effect on the device.

Syntax

show isis config

Modes

Privileged EXEC mode

Usage Guidelines

IS-IS is supported only on devices based on the DNX chipset family. For a list of such devices, see "Supported Hardware".

The running-config does not list the default values. Only commands that change a setting or add configuration information are displayed.

Examples

The following example displays sample output from the show isis config command.

device# show isis config

router isis
 net 11.768e.f805.5812.00
 address-family ipv4 unicast
!

 address-family ipv6 unicast
!