show ipv6 bgp neighbors rib-out-routes

Displays information about BGP4+ outbound RIB routes.

Syntax

show ipv6 bgp neighbors ipv6-addr rib-out-routes ipv6-addr mask [ vrf vrf-name ]

show ipv6 bgp neighbors ipv6-addr rib-out-routes detail ipv6-addr mask [ vrf vrf-name ]

show ipv6 bgp neighbors ipv6-addr rib-out-routes detail [ vrf vrf-name ]

show ipv6 bgp neighbors ipv6-addr rib-out-routes [ vrf vrf-name ]

Parameters

ipv6-addr: IPv6 address of a neighbor in dotted-decimal notation.
vrf vrf-name: Specifies a VRF instance.
detail: Displays detailed RIB route information.

Modes

Privileged EXEC mode

Examples

This example shows sample output from the show ipv6 bgp neighbors rib-out-routes command.

device# show ipv6 bgp neighbors 123::3 rib-out-routes 

       There are 5 RIB_out routes for neighbor 123::3
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST E:EBGP I:IBGP L:LOCAL
       Prefix             Next Hop        MED        LocPrf     Weight Status
1      110:110:110::/64   160:160:160::10  0         100        0      BE    
         AS_PATH: 111
2      110:110:110:1::/64 160:160:160::10  0         100        0      BE    
         AS_PATH: 111
3      110:110:110:2::/64 160:160:160::10  0         100        0      BE    
         AS_PATH: 111
4      110:110:110:3::/64 160:160:160::10  0         100        0      BE    
         AS_PATH: 111
5      110:110:110:4::/64 160:160:160::10  0         100        0      BE    
         AS_PATH: 111