tlv-type

Enables the Port Status type-length-value (TLV) metric for the specified Maintenance End Points (MEP).

Syntax

tlv-type port-status-tlv

no tlv-type port-status-tlv

Command Default

The Port Status TLV is not enabled.

Parameters

port-status-tlv: Enables the Port Status TLV metric.

Modes

CFM protocol configuration mode .

Usage Guidelines

The no tlv-type port-status-tlv command disables the Port Status TLV metric for the specified MEP.

Examples

Command example to enable the Port Status TLV metric.

device# configure terminal 
device(config-cfm)# domain name md1 level 4
device(config-cfm-md-md1)# ma-name ma1 id 1 vlan-id 30 priority 3
device(config-cfm-md-ma-ma1)# mep 1 down ethernet 1/2
device(config-cfm-md-ma-mep-1)# tlv-type port-status-tlv