neighbor capability orf prefixlist

Advertises outbound route filter (ORF) capabilities to peer routers.

Syntax

neighbor { ip_address | ipv6_address | peer-group-name } capability orf prefixlist [ receive | send ]

no neighbor { ip_address | ipv6_address | peer-group-name } capability orf prefixlist [ receive | send ]

Command Default

ORF capabilities are not advertised to a peer device.

Parameters

ip_address: Specifies the IPv4 address of the neighbor.
ipv6_address: Specifies the IPv6 address of the neighbor.
peer-group-name: Specifies a peer group.
receive: Enables the ORF prefix list capability in receive mode.
send: Enables the ORF prefix list capability in send mode.

Modes

BGP address-family IPv4 unicast configuration mode

BGP address-family IPv6 unicast configuration mode

BGP address-family IPv4 unicast VRF configuration mode

BGP address-family IPv6 unicast VRF configuration mode

Usage Guidelines

Use the no form of this command to disable ORF capabilities.

Examples

This example advertises the ORF send capability to a neighbor with the IP address 10.11.12.13.

device# configure terminal
device(config)# router bgp
device(config-bgp-router)# address-family ipv4 unicast
device(config-bgp-ipv4u)# neighbor 10.11.12.13 capability orf prefixlist send

This example advertises the ORF receive capability to a neighbor with the IPv6 address 2001:2018:8192::125 for VRF instance "red".

device# configure terminal
device(config)# router bgp
device(config-bgp-router)# address-family ipv6 unicast vrf red
device(config-bgp-ipv6u-vrf)# neighbor 2001:2018:8192::125 capability orf prefixlist receive