show debug arp packet

Displays the ARP-packet debug configuration.

Syntax

show debug arp packet [ buffer ]

Parameters

buffer
Displays ARP packets saved in the relevant buffer.

Modes

Privileged EXEC mode

Output

The show debug arp packet command displays the following information:

Output field Description
Protocol Type Displays "ARP".
Package Flow Displays "Sending" or "Rcvd".
Packet Type Displays "ARP".
VRF ID Displays the VRF ID.
Interface Info Displays the physical or port-channel interface.
ScrMAC Displays the MAC address of the source.
DstMAC Displays the MAC address of the destination.
SrcIP Displays the IP address of the source.
DstIP Displays the IP address of the destination.

Examples

The following example is a typical output of the show debug arp packet buffer option.

device# show debug arp packet buffer 
 Protocol Type        : ARP
 Packet Flow         : Sending
 Packet Type         : Req
 VRF ID              : 1
 Interface info      : Eth 1/1
 Ethernet,     SrcMAC : 768e.f807.2005, DstMAC: 0000.0000.0000
 Internet proto,SrcIP : 11.1.1.1, DstIP: 11.1.1.1

 Protocol Type        : ARP
 Packet Flow         : Sending
 Packet Type         : Req
 VRF ID              : 1
 Interface info      : Eth 1/1
 Ethernet,     SrcMAC : 768e.f807.2005, DstMAC: 0000.0000.0000
 Internet proto,SrcIP : 11.1.1.1, DstIP: 11.1.1.1

 Protocol Type        : ARP
 Packet Flow         : Rcvd
 Packet Type         : Req
 VRF ID              : 1
 Interface info      : Eth 1/1
 Ethernet,     SrcMAC : 0010.9400.0001, DstMAC: 0000.0000.0000
 Internet proto,SrcIP : 11.1.1.2, DstIP: 11.1.1.1
        
 Protocol Type        : ARP
 Packet Flow         : Sending
 Packet Type         : Rep
 VRF ID              : 1
 Interface info      : Eth 1/1
 Ethernet,     SrcMAC : 768e.f807.2005, DstMAC: 0010.9400.0001
 Internet proto, SrcIP : 11.1.1.1, DstIP: 11.1.1.2