Enables the v2 checksum computation method for a VRRPv3 IPv4 session.
VRRPv3 uses the v3 checksum computation method.
Virtual-router-group configuration mode
Some non-Extreme devices only use the v2 checksum computation method in VRRPv3. This command enables v2 checksum computation method in VRRPv3 and provides interoperability with these non-Extreme devices.
The no form of this command enables the default v3 checksum computation method in VRRPv3 sessions.
The following example shows the v2 checksum computation method enabled for an VRRPv3 IPv4 session on an Extreme device.
device(config)# protocol vrrp device(config)# interface ve 100 device(config-Ve-100)# vrrp-group 10 version 3 device(config-vrrp-group-10)# use-v2-checksum