client-interface

Configures a CEP or CCEP interface to the cluster client instance.

Syntax

client-interface { ethernet slot/port | port-channel number }

no client-interface

ethernet slot/port: Configures the specified Ethernet port as the client CEP or CCEP.
port-channel number: Configures the specified port channel as the client CEP or CCEP. The port channel number specifies the LAG ID.

Cluster client configuration mode

The no form of the command removes the client interface.

The same client interface cannot be added under multiple client entries.

A client interface is not allowed to be updated when the client is in deploy state. It needs to be removed first before adding a new interface.

The following example shows how to configure a client interface.

device(config)# cluster MCT1 1
device(config-cluster-1)# client MCT1-client 200
device(config-cluster-client-200)# client-interface port-channel 3