show ip pim rpf

Displays what PIM sees as the best reverse path to the source. While there may be multiple routes back to the source, the one displayed by this command is the one that PIM thinks is best.

Syntax

show ip pim rpf A.B.C.D [ A.B.C.D ] [ vrf vrf-name ]

Parameters

A.B.C.D: Specifies one or two source addresses for reverse-path forwarding (RPF) check.
vrf vrf-name: Displays information for the specified VRF instance.

Modes

Privileged EXEC mode

Examples

This example shows best reverse path to the specified source:

device# show ip pim vrf eng rpf 130.50.11.10
Source 130.50.11.10 directly connected on e1/1