underlay-mdt-default-group

Creates a underlay MDT default group instance.

Syntax

underlay-mdt-default-groupGroup-IP

no underlay-mdt-default-group

Command Default

Global configuration mode

Parameters

Group-IP: Specifies the IP address of the group.

Modes

Global configuration mode

Usage Guidelines

The default mdt group needs to be configured first and removed last in the optimized-replication mode.

When all vlans are removed from a group and the group config is removed. The same rule applies to BDs as well.

The no underlay-mdt-group GROUP vlan add VLAN-RANGE command can be used to remove a config if there is an exact match with the current config line or the remove option is used to remove vlans or BDs from a group.

Examples

The following example configures underlay mdt default group.

underlay-mdt-default-group 239.0.0.100