Configures the device to periodically reauthenticate the clients connected to 802.1X-enabled interfaces at regular intervals.
Periodic reauthentication is disabled.
Interface configuration mode
When periodic reauthentication is enabled using the dot1x reauthentication command, the device reauthenticates the clients every 3,600 seconds by default.
The reauthentication interval is configurable using the dot1x timeout re-authperiod command. The reauthentication interval configured using the dot1x timeout re-authperiod command takes precedence.
The no dot1x reauthentication command disables periodic reauthentication.
The following example enables 802.1x reauthentication.
device# configure terminal device(config)# interface Ethernet 1/1 device(conf-if-eth-1/1)# dot1x reauthentication