show ipv6 mld groups
Displays information about learned groups
for a specified bridge domain, interface, VLAN, MCT (Multi-Chassis Trunking) cluster, or
CCEP (Cluster Client Edge Port) client.
Syntax
show ipv6 mld groups
detail[ipv6 address
[bridge-domain
bd id
|interface
[ethernet
|
port-channel]
interface name
|
vlan
vlan id
|cluster
cluster id
|client
client id]
Parameters
- detail
- Displays the MLD v2 INCLUDE,EXCLUDE source list for the group.
- ipv6 address
- Specifies the address for which to show
group information
- bridge-domain
- Specifies the bridge domain for which to
show group information.
- bd
id
- Specifies the ID
of the bridge domain.
- interface
- Specifies the interface for which to show
group information.
- ethernet
interface name
- Specifies the
Ethernet name.
- port
channel
interface name
- Specifies the
port channel name.
- vlan
- Specifies the VLAN for which to show group
information.
- vlan
id
- Specifies the ID
of the VLAN.
- cluster
- Specifies the MCT cluster for which to show
group information.
- cluster
id
- Specifies the ID
of the cluster.
- client
- Specifies the CCEP client for which to show
group information.
- client
id
- Specifies the ID
of the client.
Modes
Privileged EXEC mode
Examples
The following example shows typical output for a VLAN.
device# show ipv6 mld groups vlan 100
Total number of groups: 1
MLD Connected Group Membership
Group Address Interface Uptime Expires Last Reporter
ff28::1 Vlan 100 00:02:03 Never Static
Member Port: Eth 0/1
The following example shows typical output for a bridge domain.
device# show ipv6 mld groups bridge-domain 10
Total number of groups: 1
MLD Connected Group Membership
Group Address Interface Uptime Expires Last Reporter
ff38::2 bridgedomain10 00:00:34 Never Static
Member Port: Eth 0/2.200
