show running-config system-monitor

Displays the system monitor configuration.

Syntax

Parameters

fan: Displays the threshold and alert setting for the FAN component.
power: Displays the threshold and alert setting for the power component.
temp: Displays the threshold for the temperature sensor component.
cid-card: Displays the threshold for the CID card component.
compact-flash: Displays the threshold for the compact flash device.
MM: Displays the threshold for the management module.
LineCard: Displays the threshold for the line card.
SFM: Displays the threshold for the switch fabric module.

Modes

Privileged EXEC mode

Usage Guidelines

This command is supported only on the local switch.

Examples

This example shows typical results. Results vary by device.

device# show running-config system-monitor
system-monitor fan threshold marginal-threshold 1 down-threshold 2
system-monitor fan alert state removed action raslog
system-monitor power threshold marginal-threshold 2 down-threshold 3
system-monitor power alert state removed action raslog
system-monitor temp threshold marginal-threshold 1 down-threshold 2
system-monitor cid-card threshold marginal-threshold 1 down-threshold 2
system-monitor cid-card alert state none action none
system-monitor compact-flash threshold marginal-threshold 1 down-threshold 0
system-monitor MM threshold marginal-threshold 1 down-threshold 0
system-monitor LineCard threshold marginal-threshold 1 down-threshold 2
system-monitor LineCard alert state none action none
system-monitor SFM threshold marginal-threshold 1 down-threshold 2
system-monitor port