show monitor

Displays the monitoring information for all port mirroring sessions or for one session.

Syntax

show monitor [ session session_number ]

Parameters

session session_number: Specifies a session identification number. Valid values range from 1 through 512.

Modes

Privileged EXEC mode

Output

The show monitor command displays the following information:


Output field	Description
Session	The identifying value applied to the session
Description	The session description.
State	The current state of the session.
Source Interface	The interface that the session is using to access the device.
Destination Interface	The destination for the session.
Direction	Displays whether the interface is receiving, transmitting, or both.

Examples

The following example displays monitoring information for all port mirroring sessions.

device# show monitor
Session                     : 1
Description                 : my_first_session
State                       : Enabled
Source Interface            : Eth 0/1  (Up)
Destination Interface       : Eth 0/11 (Up)
Direction                   : Rx

Session                     : 50
Description                 : [None]
State                       : Enabled
Source Interface            : Eth 0/2  (Down)
Destination Interface       : Eth 0/12 (Up)
Direction                   : Tx

The following example displays monitoring information for a specific port mirroring session.

device# show monitor session 1

Session                : 1
Description            : my_first_session
State                  : Enabled
Source Interface       : Eth 0/1  (Up)
Destination Interface  : Eth 0/11 (Up)
Direction              : Rx