event

Configures an event and action.

Syntax

event{ average-threshold | max-threshold | ccm-down | ccm-up } actions { interface-down | event-handler | all }

no event

Parameters

average-threshold: Specifies average thereshold.
max-threshold: Specifies maximum thereshold.
ccm-down: Specifies CCM is down
ccm-up: Specifies CCM is up.
actions: Specifies the actions.
interface-down: Specifies interface down.
event-handler: Specifies event handler.
all: Specifies all.

Modes

Y1731 configuration mode

Usage Guidelines

Use the no form of the command delete the corresponding configured action profile also corresponding associations with Source and Target MEP pair.

Examples

This example shows how to create an action profile.

device# configure terminal
device(config)# protocol cfm
device(config-cfm)# y1731 
device(config-cfm-y1731)# action-profile action-prof-act1 
device((protocol-cfm)# event max-threshold actions all