show firmwaredownloadstatus

Displays the firmware download activity log.

Syntax

show firmwaredownloadstatus [ brief ] [ summary ]

Parameters

brief: Displays only the last entry of the firmware download event log.
summary: Displays a high-level summary of the firmware download status.

Modes

Privileged EXEC mode

Usage Guidelines

Use this command to display an event log that records the progress and status of events that occur during a firmware download. The event log is created by the firmware download command and is retained until you issue another firmware download command. A time stamp is associated with each event.

The output of show firmwaredownloadstatus and show firmwaredownloadstatus brief are equivalent.

The output varies depending on the hardware platform.

Examples

The following example displays the firmware download event log.

device# show firmwaredownloadstatus
 [1]: Wed Mar  1 21:58:34 2017
Slot M1: Firmware install begins.

[2]: Wed Mar  1 22:03:59 2017
Slot M1: Firmware install ends.

[3]: Wed Mar  1 22:03:59 2017
Slot M1: Firmware starts to swap.

[4]: Wed Mar  1 22:04:19 2017
Slot M1: Firmware is swapped.

[5]: Wed Mar  1 22:04:20 2017
Slot M1: The blade begins to reboot.

[6]: Wed Mar  1 22:09:03 2017
Slot L2/0: Firmware install begins.

[7]: Wed Mar  1 22:09:08 2017
Slot L4/0: Firmware install begins.

[8]: Wed Mar  1 22:11:37 2017
Slot L2/0: Firmware install ends.

[9]: Wed Mar  1 22:11:37 2017
Slot L2/0: Firmware starts to swap.

[10]: Wed Mar  1 22:11:46 2017
Slot L4/0: Firmware install ends.

(Output truncated)

The following example displays a high-level summary of the firmware download status.

device# show firmwaredownloadstatus summary 
No Firmware Download session in progress.