show ip ospf

Displays OSPF information.

Syntax

show ip ospf [ vrf name ]

Parameters

vrf name
Specifies the name of the VRF instance. If this option is not used, details for the default VRF are shown in the output.

Modes

Privileged EXEC mode

Usage Guidelines

Examples

The following example shows sample output from the show ip ospf command.

device# show ip ospf
OSPF Version                  Version 2
Router Id                     10.0.0.4
ASBR Status                   No
ABR Status                    No         (0)
Redistribute Ext Routes from
Initial SPF schedule delay    0          (msecs)
Minimum hold time for SPFs    0          (msecs)
Maximum hold time for SPFs    0          (msecs)
External LSA Counter          0
External LSA Checksum Sum     0
Originate New LSA Counter     0
Rx New LSA Counter            0
External LSA Limit            14913080
Administrative Distance
  -  External Routes:         110
  -  Intra Area Routes:       110
  -  Inter Area Routes:       110
Database Overflow Interval    0
Database Overflow State :     NOT OVERFLOWED
RFC 1583 Compatibility :      Disabled
NSSA Translator:              Enabled
Nonstop Routing:              Disabled
Graceful Restart              Enabled
Graceful Restart Helper       Enabled
Graceful Restart Time         120
LDP-SYNC: Not globally enabled
Interfaces with LDP-SYNC enabled:
    None