show sflow

Displays sFlow configuration information and statistics.

Syntax

show sflow {interface | all}

Command Default

sFlow is disabled on all interfaces.

Parameters

all: Displays all sFlow information and statistics.
interface: Displays sFlow information for an Ethernet interface.

Modes

Privileged EXEC mode

Examples

The following example displays sFlow information.

device# show sflow 
sFlow services are:                      enabled
sFlow null0 sampling:                    enabled
Global default sampling rate:            2048 pkts
Global default counter polling interval: 20 secs
sFlow Agent-ID address:                  21.21.21.21
sFlow Source Interface:                  management 0
Collector server address                        Vrf-Name      Sflow datagrams sent
----------------------------------------------------------------------------------
                           10.1.3.2:6343        default-vrf                  438
                      172.22.108.57:6343        mgmt-vrf                     438
                     2001:10:1:4::2:6343        default-vrf                  438

ACL based samples collected (permit):    0
ACL based samples collected (deny):      0
VxLAN Visibility samples collected:      0
VxLAN Gateway samples collected:         0