Updates the Complex Programmable Logic Device (CPLD) flash memory with the latest image from the installation package.
Privileged EXEC mode
This command is supported only on SLX 9540 and SLX 9640 devices.
The following message appears when this command is executed:
WARNING: Hardware image will be upgraded and followed with a board-level power cycling. Do you want to continue?[y/n]:
After the CPLD is updated, the entire board is power-cycled.
The following example upgrades the firmware on an SLX 9540.
device# firmware peripheral-update cpld
WARNING: Hardware image will be upgraded and followed with a board-level power cycling.
Do you want to continue?[y/n]: y
for cpld0:
erasing ........done
programming .......................... 25% ......................... 50% .......................... 75% ......................... 100%
for cpld1:
erasing ........done
programming .......................... 25% ......................... 50% .......................... 75% ......................... 100%