Enables Multiple VLAN Registration Protocol (MVRP) globally on the device and accesses MVRP configuration mode.
MVRP is disabled globally and on all interfaces by default.
Global configuration mode
This feature is supported on the SLX 9540 and SLX 9640 devices only.
The no form of this command disables MVRP globally on the device and on all interfaces enabled with MVRP.
For an interface to participate in MVRP, you must configure MVRP on the interface through the mvrp enable command.
You cannot enable MVRP when the following features are enabled on the device and vice versa:
The following example shows the enabling of MVRP globally.
device# configure terminal device (config)# protocol mvrp device (config-mvrp)#