Enables the bypass LSP.
The default value is disabled.
MPLS router bypass LSP configuration mode
Enable the bypass LSP only after configuring the to-address and exclude-interface.
The no form of the command disables the bypass LSP.
MPLS is supported only on devices based on the DNX chipset family. For a list of such devices, see "Supported Hardware".
The following example enables the bypass LSP with the name my-bypass-lsp.
device# configure terminal device(config)# router mpls device(config-router-mpls)# bypass-lsp my-bypass-lsp device(config-router-mpls-bypass-lsp-my-bypass-lsp)# enable