qos random-detect traffic-class
Configures Random Early Detect (RED) profile on a traffic class of an interface
Syntax
qos random-detect
traffic-class
traffic-class
drop-precedence
value
red-profile-id
ID
no qos random-detect
traffic-class
traffic-class
drop-precedence
Parameters
- traffic-class
- Specifies the traffic class to apply the RED profile. Enter an integer from 0 through 7.
-
drop-precedence
value
- Specifies the drop precedence value for the
traffic class. Enter an integer from 1 from 3.
- red-profile-id
ID
- Specifies the RED profile to assign to traffic class on the interface. Enter the identifier for a configured profile.
Modes
Interface configuration mode
Usage Guidelines
Use the
no form of the command to remove the RED profile from the interface or the drop precedence for the traffic class on the interface.
Examples
The following example configures a RED profile
on an interface.
device# configure terminal
device(config)# interface ethernet 0/2
device(conf-if-eth-0/2)# qos random-detect traffic-class 4 drop-precedence 1 red-profile-id 22
