debug ip pim

Enables debugging for IP Protocol Independent Multicast.

Syntax

debug ip pim { add-del-oif | bootstrap | group | join-prune | nbr-change | packets | parent | regproc | route-change | rp | source | state | all }
no debug ip pim all

Command Default

All flags are disabled.

Parameters

add-del-oif
Controls the OIF change flag.
bootstrap
Controls the bootstrap processing flag.
group
Controls the processing for a group flag.
join-prune
Controls the Join/Prune processing flag.
nbr-change
Controls the neighbor changes flag.
packets
Controls the packet processing flag.
parent
Controls the parent change processing flag.
regproc
Controls the register processing flag.
route-change
Controls the route changes flag.
rp
Controls the Rendezvous Point (RP) processing flag.
source
Controls the processing for a source flag.
state
Controls the state processing flag.
all
Controls all of the states.

Modes

Privileged EXEC mode

Usage Guidelines

Diagnostic commands are developed and intended for specialized troubleshooting. Work closely with Extreme Networks technical support when running debug or show system internal commands and interpreting their results.

Use the no debug ip pim all command to disable debugging.