show ip igmp groups

Displays information related to learned groups in the IGMP protocol module.

Syntax

show ip igmp groups [ detail | interface | vlan vlan_id | bridge-domain bridge-domain_id | cluster cluster_id | client client_id]

Parameters

detail
Displays detailed information.
interface
Specifies an interface type.
vlan vlan_id
Specifies a VLAN interface.
bridge-domain bridge-domain_id
Specifies a bridge-domain interface.
cluster cluster_id
Specifies a Multi-Chassis Trunk (MCT) cluster.
client client_id
Specifies a Cluster Client Edge Port (CCEP) client.

Modes

Privileged EXEC mode

Usage Guidelines

Use this command to display the IGMP database, including configured entries for either all groups on all interfaces, or all groups on specific interfaces, or specific groups on specific interfaces.

Examples

The following example displays the IP IGMP groups.

device# show ip igmp groups
Total Number of Groups: 2
IGMP Connected Group Membership
Group Address  Interface Uptime      Expires      Last Reporter   Version
225.1.1.1      vlan25    00:05:27     00:02:32     25.1.1.120       2
Member Ports: eth 2/24

225.1.1.2 bridge-domain20 00:05:27    00:02:32     25.1.1.120       2
Member Ports:  eth4/22.600 eth6/15.200  po2.200