qos rx-queue unicast traffic-class
Configures the ingress queue unicast packet traffic class parameter on an Ethernet interface.
Syntax
qos rx-queue unicast traffic-class
traffic_class
min-queue-size
minimum_size
max-queue-size
maximum_size
no qos rx-queue unicast
traffic class
number
min-queue-size
Mbytes
max-queue-size
Mbytes
Parameters
- traffic class
number
- Specifies the traffic class on the interface. Enter an integer from 0 to 7.
- min-queue-size
Mbytes
- Specifies the minimum queue size in megabytes per second. Enter an integer from 0 through 1024.
-
max-queue-size
Mbytes
- Specifies the maximum queue size in megabytes per second. Enter an integer from 0 through 2048.
Modes
Ethernet interface configuration mode
Examples
The following example configures tan Ethernet interface ingress queue minimum and maximum queue size by a traffic class. .
device# configure terminal
device(config)# interface ethernet 1/2
device(conf-if-eth-1/2)# qos rx-queue unicast traffic-class 3 min-queue-size 128 max-queue-size 1024
