Displays information about IPv4 VRRP and VRRP-E sessions.
Privileged EXEC mode
Use this command to display information about VRRP and VRRP-E sessions, either in summary or full-detail format. You can also specify a particular virtual group ID or interface for which to display output.
This command is for VRRP and VRRP-E. VRRP-E supports only the VE interface type.
To display information for VRRP sessions using the default VRF, you can use the show vrrp summary command syntax (with no additional parameters).
For the default or a named VRF, you can use the show vrrp summary vrf command syntax with the vrf-name option.
To display information for all VRFs, use the show vrrp summary vrf all command.
The following example shows all VRRP session information in detail, including session statistics.
device# show vrrp detail
Total number of VRRP session(s) : 2
VRID 14
Interface: Ve 2018; Ifindex: 1207961570
Mode: VRRP
Admin Status: Enabled
Description :
Address family: IPv4
Version: 2
Authentication type: No Authentication
State: Master
Session Master IP Address: Local
Virtual IP(s): 10.18.1.100
Virtual MAC Address: 0000.5e00.0112
Configured Priority: unset (default: 100); Current Priority: 100
Advertisement interval: 1 sec (default: 1 sec)
Preempt mode: ENABLE (default: ENABLE)
Hold time: 0 sec (default: 0 sec)
Master Down interval: 4 sec
Trackport:
Port(s) Priority Port Status
======= ======== ===========
Global Statistics:
==================
Checksum Error : 0
Version Error : 0
VRID Invalid : 0
Session Statistics:
===================
Advertisements : Rx: 0, Tx: 49
Gratuitous ARP : Tx: 1
Session becoming master : 1
Advts with wrong interval : 0
Prio Zero pkts : Rx: 0, Tx: 0
Invalid Pkts Rvcd : 0
Bad Virtual-IP Pkts : 0
Invalid Authenticaton type : 0
Invalid TTL Value : 0
Invalid Packet Length : 0
VRID 15
Interface: Ve 2019; Ifindex: 1207961571
Mode: VRRP
Admin Status: Enabled
Description :
Address family: IPv4
Version: 2
Authentication type: No Authentication
State: Master
Session Master IP Address: Local
Virtual IP(s): 10.19.1.100
Virtual MAC Address: 0000.5e00.0113
Configured Priority: unset (default: 100); Current Priority: 100
Advertisement interval: 1 sec (default: 1 sec)
Preempt mode: ENABLE (default: ENABLE)
Hold time: 0 sec (default: 0 sec)
Master Down interval: 4 sec
Trackport:
Port(s) Priority Port Status
======= ======== ===========
Global Statistics:
==================
Checksum Error : 0
Version Error : 0
VRID Invalid : 0
Session Statistics:
===================
Advertisements : Rx: 0, Tx: 81
Gratuitous ARP : Tx: 1
Session becoming master : 1
Advts with wrong interval : 0
Prio Zero pkts : Rx: 0, Tx: 0
Invalid Pkts Rvcd : 0
Bad Virtual-IP Pkts : 0
Invalid Authenticaton type : 0
Invalid TTL Value : 0
Invalid Packet Length : 0
The following example displays summary information for VRRP statistics on the VRF named Marketing.
device# show vrrp summary vrf Marketing
Total number of VRRP session(s) : 1
Master session count : 1
Backup session count : 0
Init session count : 0
VRID Session Interface Admin Current State Short-path Revert SPF
State Priority Forwarding Priority Reverted
==== ======= ========= ===== ======== ===== ========== ======== ========
14 VRRP Ve 2018 Enabled 100 Master
The following example displays summary information for VRRP statistics on all VRFs.
device# show vrrp summary vrf all
Total number of VRRP session(s) : 2
Master session count : 2
Backup session count : 0
Init session count : 0
VRID Session Interface Admin Current State Short-path Revert SPF
State Priority Forwarding Priority Reverted
==== ======= ========= ===== ======== ===== ========== ======== ========
14 VRRP Ve 2018 Enabled 100 Master
15 VRRP Ve 2019 Enabled 100 Master
The following example displays summary information for VRRP statistics on the default VRF. (This command is equivalent to show vrrp summary.)
device# show vrrp summary vrf default-vrf
Total number of VRRP session(s) : 1
Master session count : 1
Backup session count : 0
Init session count : 0
VRID Session Interface Admin Current State Short-path Revert SPF
State Priority Forwarding Priority Reverted
==== ======= ========= ===== ======== ===== ========== ======== ========
15 VRRP Ve 2019 Enabled 100 Master
The following example displays information for VRRP-E tracked networks.
device# show vrrp detail
Total number of VRRP session(s) : 1
VRID 3
Interface: Ve 100; Ifindex: 1207959652
Mode: VRRPE
Admin Status: Enabled
Description :
Address family: IPv4
Version: 2
Authentication type: No Authentication
State: Master
Session Master IP Address: Local
Virtual IP(s): 10.1.1.100
Virtual MAC Address: 02e0.523d.750a
Configured Priority: unset (default: 100); Current Priority: 100
Advertisement interval: 1 sec (default: 1 sec)
Preempt mode: DISABLE (default: DISABLED)
Advertise-backup: DISABLE (default: DISABLED)
Backup Advertisement interval: 60 sec (default: 60 sec)
Short-path-forwarding: Disabled
Revert-Priority: unset; SPF Reverted: No
Hold time: 0 sec (default: 0 sec)
Master Down interval: 4 sec
Trackport:
Port(s) Priority Port Status
======= ======== ===========
Tracknetwork:
Network(s) Priority Status
========= ======== ==========
10.20.1.0/24 50 Up
Global Statistics:
==================
Checksum Error : 0
Version Error : 0
VRID Invalid : 0
Session Statistics:
===================
Advertisements : Rx: 0, Tx: 35
Neighbor Advertisements : Tx: 19
Session becoming master : 1
Advts with wrong interval : 0
Prio Zero pkts : Rx: 0, Tx: 0
Invalid Pkts Rvcd : 0
Bad Virtual-IP Pkts : 0
Invalid Authenticaton type : 0
Invalid TTL Value : 0
Invalid Packet Length : 0
VRRPE backup advt sent : 0
VRRPE backup advt recvd : 0