Removes a physical or port-channel interface on an edge port from participating in logical interface (LIF) data traffic without the need to shut down the interface.
The LIF service instance is not shut down.
LIF configuration mode on a physical port or port-channel
Use the no form of this command to restore the service instance status to the default.
The following example removes a service instance on an Ethernet port from participating in data traffic.
device(config)# interface ethernet 2/6 device(conf-if-eth-2/6)# logical-interface ethernet 2/6.120 device(conf-if-eth-lif-2/6.120)# shutdown