show media interface

Displays the SFP information for a specific interface.

Syntax

show media interface [ethernet slot / port ]

Parameters

ethernet
Specifies a physical Ethernet interface.
slot
Specifies a valid slot number. For devices that do not support line cards, specify 0.
port
Specifies a valid port number.

Modes

Privileged EXEC mode

Examples

To display SPF information, use the following command:

switch# show media interface ethernet 5/1
 
  Interface       Ethernet 5/1
  Identifier      2    On-board
  Connector       34   CAT-5 copper cable
  Transceiver     1000 BASE-T Gigabit Ethernet
  Name            cu
  Encoding        5    IEEE 802.3ab
  Length          max 100 m
  Copper Speed    1GB/s Fixed
  Copper Duplex   Full Duplex
  Sync status     Valid/No
  Vendor Name     Broadcom
  Vendor OUI      00:1B:E9
  Vendor model    02:0F
  Vendor Rev      01
  Options         001a Remote fault/Jabber detect/copper link up
  Temperature threshold/val    55 Centigrade
  Voltage threshold/val        3289.9  (mVolts)