ma-name
Creates a maintenance association (MA) within a specified domain. The command changes the maintenance domain mode to the specified maintenance association mode.
Syntax
ma-name
ma-name
[
id
ma-id
]
[
vlan-id
vlan-id
]
[
bridge-domain
bridge-domain
]
{
priority
priority
}
Command Default
There are no MA configured.
Parameters
- ma-name
- Specifies the maintenance association name. The name attribute is case-sensitive.
- ma-id
- Specifies the short maid that is transmitted in the CCM PDU. This ID is unique. The range is 1 - 4090.
- vlan-id
- Specifies a unique VLAN identifier of the maintenance association in the range 1-4090. To create a MA, a vlan id must be set.
- bridge-domain
- Specifies a unique L2VPN domain of the maintenance association. This option supports only Virtual Private LAN Services (VPLS) in this release. VLL is not currently supported for CFM.
- priority
- Specifies the priority of the CCM messages sent by MEPs, in the range 0-7.
Modes
CFM protocol configuration mode
Usage Guidelines
The
no form of the command removes the maintenance association.
Examples
This example demonstrates associating the MA "ma1" to VLAN 30.
device# configure terminal
device(config)# protocol cfm
device(config-cfm)# domain name md1 level 4
device(config-cfm-md-md1)# ma-name ma1 id 1 vlan-id 30 priority 4
device(config-cfm-md-ma-ma1)#
