flex-cli show local-fault interface

Displays the local faults of an interface.

Syntax

flex-cli show local-fault interface [ ethernet slot/port | port-channel port-chnnel-number ]

Parameters

ethernet: Specifies Ethernet interface.
slot-number: Specifies the slot number.
port-channel: Specifies port-channel.
port-channel numbe: Specifies the port-channel number.

Modes

Privileged EXEC mode

Examples

This example displays the local faults of an interface.

device# flex-cli show local-fault interface ethernet 0/9
Port    Local-Fault-Detected      Local-Fault-Count  Time-Last-Local-Fault-Dete
ted
0/9     No                                        0  N/A
dutC-Aval#
0/4     No                                        0  N/A
0/5     No                                        0  N/A
0/6     No                                        0  N/A
0/7     No                                        0  N/A
0/8     No                                        0  N/A
0/9     No                                        0  N/A
0/10    No                                        0  N/A
0/11    No                                        0  N/A
0/12    No                                        0  N/A
0/13    No                                        0  N/A
0/14    No                                        0  N/A
0/15    No                                        0  N/A
0/16    No                                        0  N/A
0/17    No                                        0  N/A
0/18    No                                        0  N/A
0/19    No                                        0  N/A
0/20    No                                        0  N/A
0/21    No                                        0  N/A