Excludes the Ethernet header (14 bytes) and Ethernet overhead (20 bytes) and CRC overhead (four bytes) when collecting byte statistics. In other words, it counts only the size of the MPLS packet.
The command is disabled, by default.
MPLS policy configuration mode.
To collect accurate statistics of the bypass LSP, it is necessary to configure ingress tunnel accounting at Label Switch Routers (LSR).
The no form of the command disables the configuration.
MPLS is supported only on devices based on the DNX chipset family. For a list of such devices, see "Supported Hardware".
The example below is a sample configuration for the command.
device# configure device(config)# router mpls device(config-router-mpls)# policy device(config-router-mpls-policy) ingress-tunnel-accounting