message-interval

Configures the frequency with which PIM Join and Prune messages are sent.

Syntax

message-interval num

no message-interval num

The default frequency is every 60 seconds.

num: The frequency in seconds. Valid values range from 10 through 65535 seconds.

Router PIM configuration mode

The no message-interval form of the command restores the default frequency of 60 seconds.

This example configures a frequency of 1 hour for IPv4 PIM.

device(config)# router pim
device(config-pim-router)# message-interval 3600

This example configures a frequency of 1 hour for IPv6 PIM.

device(config)# ipv6 router pim
device(config-ipv6-router-pim-vrf-default-vrf)# message-interval 3600