Sets the default Ring Automatic Protection Switching (R-APS) destination MAC address for Ethernet Ring Protection (ERP).
The default RAPS destination MAC address is 01:19:A7:00:00:01 for all ring ID and R-APS messages.
ERP configuration mode
The device appends the number configured by this command to the end of the permanent portion of the ERP MAC address 01:19:A7:00:00:<01 or ERP ID> in R-APS messages. By default, 01:19:A7:00:00:01 is used as the destination MAC address, which is always used by Version 1 of ITU-T 8032.
If Version 2 is configured, use the no raps-default-mac command to revert to a non-default R-APS destination MAC address. The configured ERP ID appears as the last 8-bit number in the destination MAC address.
The following example sets a default R-APS destination MAC address.
device# configure terminal device(config)# erp 1 device(config-erp-1)# raps-default-mac