show ipv6 pim neighbor

Displays information about active neighbors for a PIM router.

Syntax

show ipv6 pim neighbor [interface {ethernet | ve} interface-num ]

Parameters

interface
Specifies an interface for which to display neighbor information.
ethernet interface-num
Specifies an Ethernet interface name in the slot or port.
ve interface-num
Specifies a virtual Ethernet interface number.

Modes

Privileged EXEC mode

Usage Guidelines

The show ipv6 pim neighbor form of this command displays neighbor information for the node on which you execute the command.

The show ipv6 pim neighbor interface ve form of this command displays neighbor information for the VE interface on the node on which you execute the command.

The show ipv6 pim neighbor interface ethernet form of this command displays neighbor information for the Ethernet interface on the node on which you execute the command.

Examples

This example shows typical output for the show ipv6 pim neighbor form of the command.

device# show ipv6 pim neighbor
Total Number of Neighbors : 4
Port         Phy_Port     Neighbor                                Holdtime Age           UpTime  Priority
                                                                  sec      sec      Dd HH:MM:SS
Eth 0/6      Eth 0/6      fe80::da84:66ff:feea:3b1f               105      16          01:32:17         1
                         +2001:6:8:68::6
Ve20         Ve20         fe80::7aa6:e1ff:fe45:9815               105      19          01:42:21         1
                         +2001:5:8:58::5
Ve40         Ve40         fe80::748e:f8ff:fe05:7801               105      10       7d 07:10:24         1
                         +2001:2:8:28::2
Ve41         Ve41         fe80::748e:f8ff:fe05:7801               105      10       7d 07:10:23         1
                         +2001:8:2:82::2