lsp-refresh-interval

Sets the maximum number of seconds a device waits between sending updated Link State PDUs (LSPs) to its Intermediate System-to-Intermediate System (IS-IS) neighbors.

Syntax

lsp-refresh-interval interval
no lsp-refresh-interval interval

Command Default

The default interval is 900 seconds (15 minutes).

Parameters

secs

Specifies the interval in seconds. Valid values range from 1 through 65535 seconds. The default is 900 seconds.

Modes

IS-IS router configuration mode

Usage Guidelines

IS-IS is supported only on devices based on the DNX chipset family. For a list of such devices, see "Supported Hardware".

The no form of the command removes the configured interval.

Examples

The following example changes the LSP refresh interval to 20000 seconds.

device# configure terminal
device(config)# router isis
device(config-isis-router)# lsp-refresh-interval 20000