Indicates the MPLS FEC address to be used for the mpls-traffic-fec profile.
Telemetry profile configuration mode
The fec-address variable must be unique.
The no form of the command deletes the FEC address from the profile.
MPLS is supported only on devices based on the DNX chipset family. For a list of such devices, see "Supported Hardware".
The following example selects 20.10.3.4 as the FEC address for the profile.
device(config)# telemetry profile mpls-traffic-fec default_mpls_traffic_fec_statistics device(config-telemetry-profile)# fec 20.10.3.4