ip igmp snooping query-interval

Sets the IGMP snooping query interval in seconds.

Syntax

ip igmp snooping query-interval seconds
no ip igmp snooping query-interval seconds

Command Default

The query interval is enabled by default with a value of 125 seconds.

Parameters

seconds
Sets the IGMP snooping query interval in seconds. The range is 1-18000 seconds.

Modes

VLAN configuration mode

Usage Guidelines

The snooping query interval is the frequency with which the device sends group membership queries.

Examples

The following example sets the IGMP snooping query interval.

device(config)# vlan 1
device(config-vlan-1)# ip igmp snooping query-interval 200