Alters the timing of the authentication key add-remove interval.
Specifies the add-remove interval in seconds. Valid values range from 0 through 14400. The default is 300 seconds.
OSPFv3 router configuration mode
OSPFv3 router VRF configuration mode
The no form of the command resets the add-remove interval to the default value of 300 seconds.
The following example sets the key add-remove interval to 240 seconds.
device# configure terminal device(config)# ipv6 router ospf device(config-ipv6-router-ospf-vrf-default-vrf)# key-add-remove-interval 240