Displays the link OAM information.
Privileged EXEC mode
The show link-oam info command displays the following information:
| Output field | Description |
|---|---|
| Ethernet Port | Indicates the ethernet port where the EFM-OAM is enabled. |
| Link Status | Indicates whether the physical link is operational (up) or has any fault (down). |
| OAM Status | Indicates the status of OAM on the link between the local and remote DTEs. The status is enabled if the OAM client is satisfied with the local and remote settings. |
| Mode | Indicates whether the DTE is in active or passive modes. Active DTEs can start the discovery process and passive DTEs can only respond. |
| Local Stable | Indicates the reception of the remote DTE state information and is satisfied with the remote OAM settings. |
| Remote Stable | Indicates the reception of the local DTE state information at the remote DTE and is satisfied with the local OAM settings. |
The following example displays sample output from the show link-oam info command.
device#show link-oam info Ethernet Link Status OAM Status Mode Local Stable Remote Stable 1/1 up up active satisfied satisfied 1/2 up up passive satisfied satisfied 1/3 up up active satisfied satisfied 1/4 up init passive unsatisfied unsatisfied 1/5 down down passive unsatisfied unsatisfied 1/6 down down passive unsatisfied unsatisfied 1/7 down down passive unsatisfied unsatisfied